Common Terms Related to the Gas Sensors Core Performance

2026-11-18 16:06:35

Gas Sensors Core Performance

During the research, development and selection of gas monitoring equipment, the GAS SENSORS CORE PERFORMANCE directly determines the accuracy of the monitoring data and whether the equipment can operate stably over the long term. This article provides a systematic overview of common terminology and key indicators relating to core sensor performance, helping you to clarify easily confused concepts and master a practical approach to sensor selection.

 

When evaluating gas sensors core performance for the R&D and selection, resolution, sensitivity, accuracy, error and the limit of detection (LOD) are the five parameters most prone to confusion. The following table provides a clear distinction:

Gas Sensors Core Performance

Key Metrics That Are Easily Overlooked Yet Directly Impact Gas Sensors Core Performance

1. T90 Response Time — A Core Metric for Safety Monitoring Equipment

Description: The time required for the reading to reach 90% of its stable value after the target gas is introduced. This is a core performance metric for measuring sensor response speed and a key reference parameter for industrial safety alarm equipment.

PID and laser series: T90 ≤ 5 s, suitable for mobile inspection scenarios;

Conventional electrochemical sensors: T90 range 15–30 s; fast-response hydrogen models can be reduced to 10 s, suitable for high-frequency inspection robots.

 

2. Zero Drift

Description: In environments such as underground manholes, low temperatures in the north, and high temperatures and humidity in the south, temperature fluctuations can easily cause baseline shifts.

The Sangbay H4 series oxygen sensor features an optimised design for a wide temperature range, with zero drift controlled within an extremely low range between –30 °C and 50 °C, making them suitable for harsh operating conditions in enclosed spaces with significant temperature fluctuations.

 

3. Service Life: A Key Factor in Assessing Long-Term Sensor Performance and Operating Costs

Conventional electrochemical toxic gas sensors have a standard service life of 2 years; lead-free oxygen sensors can operate reliably for up to 5 years; infrared and laser sensors have a service life of over 5 years, making them suitable for long-term, unattended monitoring projects and reducing the frequency of component replacement and on-site calibration; the UV lamp used for PID sensors is a consumable part and should be maintained and replaced annually.

 

4. Resistance to cross-interference, minimising false alarms

Description: The coexistence of multiple gases is the primary cause of false alarms; hydrogen and alcohol-based gases are common sources of interference in septic tanks, chemical workshops and brewing facilities.

The high-end electrochemical sensors of Sangbay utilize a four-electrode structure combined with specialized chemical filter membranes to minimize cross-responses from contaminant gases and reduce false alarms.

 

5. Low power consumption – essential for battery-powered IoT devices

For small, battery-powered IoT monitoring terminals, low power consumption is a essential requirement. The MINI 4-in-1 gas sensor module has a total power consumption of less than 1W, making it suitable for passive online monitoring equipment in manholes and grain silos.

 

Having clarified the concepts of gas sensors core performance and key indicators, how can one correctly select the most suitable sensor based on project conditions? Generally, the following five steps can be followed to analyse project requirements and quickly identify a suitable solution:

1. Identify the detection gas: Clarify the types of target gases and the on-site concentration ranges;

2. Analyse operating conditions: Confirm the temperature and humidity ranges, whether there are multiple interfering gases, and the device’s power supply method;

3. Define core performance standards: For trace environmental monitoring, select high-resolution products; for safety alarm devices, prioritise models with a short T90 response time;

4. Match the hardware form: For single-channel monitoring devices, select single sensors; for compact multi-gas terminals, prioritise integrated modules. The MINI 4-in-1 gas sensor module can replace four independent sensor units, significantly reducing the internal space required by the equipment;

5. Calculate long-term operational and maintenance costs: For short-term, small-batch deployments, electrochemical solutions may be suitable; for five-year unattended projects, prioritise infrared or laser products with long service lives.

 

By following the five-step selection approach above, after comprehensively evaluating and matching sensors, the solution can be implemented in various monitoring application scenarios such as municipal pipeline networks, smart grain silos, tunnels, energy storage power stations, industrial inspections and chemical environments, etc. to achieve stable and reliable gas monitoring.

Home WhatsApp Mail Inquiry